Nikkel Alloy Monel 400 UNS N04400
HY M400 Materiale kvaliteter og ækvivalenter
Nonel 400 / Alloy400 /UNS N04400 / SEW VDIUV W.Nr.2.4360 NiCu30Fe /BS NA 12 /AFNOR Nu 30
HY M400 Kemisk sammensætning
Legering |
% |
Ni |
Cu |
Fe |
C |
Миннесота |
си |
S |
HY M400 |
Min. |
63 |
28 |
|||||
Max. |
34 |
2.5 |
0,3 |
2 |
0.5 |
0,024 |
HY M400 Fysiske egenskaber
density |
8,83 g / cm³ |
Smeltepunkt |
1300-1390 ℃ |
HY M400 Alloy minimum mekaniske egenskaber i rumtemperaturen
Alloy tilstand |
trækstyrke |
Udbytte styrke |
forlængelse |
HY M400 |
480 |
170 |
35 |
Karakteristisk som nedenfor:
HY M400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance.
HY M400 Metallurgical structure
HY M400 alloy is high-intensity single-phase solid solution.
HY M400 Korrosionsbestandighed
HY M400 legering i fluorid gas, saltsyre, svovlsyre, flussyre og derivater deraf har en meget god korrosionsbestandighed ejendom, og besidder bedre korrosionsbestandighed mere end kobberlegeringen i havvand. Acid medium: HY M400have korrosionsbestandighed i mindre end 85% konsistens af svovlsyre. HY M400is et vigtigt materiale, modstandsdygtig over for hydrogenfluoridsyre. Vand korrosion: HY M400 legering i de fleste korrosion tilfælde af vand, ikke kun fremragende korrosionsbestandighed, men også mindre grubetæring, spændingskorrosion, korrosionshastigheden mindre end 0,025 mm / år. Høj temperatur korrosion: HY M400 for arbejdet i den højeste temperatur på omkring 600 ℃ i almindelighed i luften, i den høje temperatur damp, korrosionshastigheden mindre end 0.026mm / a. Ammoniak:. HY M400 kan være resistente over for et vandholdigt ammoniak og aminere betingelser korrosion under 585 ℃ grund af den høje nikkel
HY M400 Application felt:
HY M400 legering er en multi-purpose materiale i mange industrielle anvendelser:
1. Problemfri vandrør i magten fabrikken
2. Sea-vand varmeveksler og fordamper
3. Svovlsyre og saltsyre miljø
4. Rå destillation
5. Havvand i brugen af udstyr og propellerakslen
6. Nuklear industri og anvendes til fremstilling af uran berigelse isotopseparationsudstyret
7. Fremstiller saltsyre udstyr, der anvendes i produktionen af pumpe og ventil
specificazione:
Pipe Smls |
Pipe Welded |
Sheet/Plate |
Bar |
Forging |
Fitting |
Tråd |
B165/ B163 |
B725 |
B127 |
B164 |
B564 |
B366 |
- |
forma regolare per tutti i tipi di leghe | |||
Modulo | specificazione | fornitura Modulo | Andre |
Ark | Spessore: 0.40-4.75mm, Generale Larghezza: 1000,1219,1500mm | Tutta la bobina o di parte di esso | Ricotto a freddo, superficiale 2B, 2E |
Plade | Spessore: 4.76-60mm, Larghezza: 1500,2000,2500mm, Lunghezza: 3000,6000,8000,8500mm (piastra di base 10 millimetri può essere arrotolato) | Tutta la bobina o di parte di esso | laminazione a caldo singolo, stato solido soluzione ricotto, 1D Surface |
Bælte | Tykkelse: 0.10-3.0mm, Bredde: 50-500mm | Tutta la bobina o formato specificato | Ricotto a freddo, superficiale 2B, 2E |
Bar & Rod | Laminati barΦ5-45mm, Length≤1500mm | Lucido Bar (cerchio, quadrato) | Soluzione ricottura, decalcificazione |
Forged barΦ26-245mm, Length≤4000mm | |||
tubo Weld | Outer diameterΦ4.76-135mm, Muro Thickness0.25-4.00mm, Lunghezza: ≤35000 mm | Base sul vostro requisito | |
tubi senza saldatura | Outer diameterΦ3-114mm, Muro Thickness0.2-4.5mm | Base sul vostro requisito | |
Tråd | Outer diameterΦ0.1-13mm | Base sul vostro requisito | Ni Ni & lega, Ti e Ti lega |
forgiato | skiver, ringe, pladser, blokke, plader | Base sul vostro requisito | Acciaio, lega |
Flangs | Tutti i tipi di Flangs | Base sul vostro requisito | Acciaio, lega |
saldatura Materiale | filo della bobina Φ0.025mm-1,6 millimetri | Base sul vostro requisito | Certificato di Origine: America, Svezia, Gran Bretagna, Germania, Austria, Italia, Francia. |
Dritto WireΦ1.6mm-4,0 millimetri | |||
Saldatura rodΦ1.2mm-4,0 millimetri | |||
Rør | Gomito, tre collegamenti, quattro collegamenti, formato differente diametro | Base sul vostro requisito | Ni Ni & lega, Ti e Ti lega |
Explosive laminato composito | Foglio Thickness≥2mm Raw | Base sul vostro requisito | Ni Ni & lega, Ti e Ti lega |