Lega di nichel Incoloy 926 UNS N08926
HY 926 gradi Materiale ed equivalenti
Incoloy 926 / Alloy926 / UNS N08926 / W.Nr.1.4529
Composizione HY 926 chimica:
Lega |
% |
Ni |
Cr |
Fe |
C |
Миннесота |
си |
Cu |
momento |
N |
Ti |
P |
S |
926 |
Min. |
24 |
19 |
Equilibrio |
0.5 |
6.0 |
0,15 |
0.6 |
|||||
Max. |
26 |
21 |
0.02 |
2 |
0.5 |
1.5 |
7.0 |
0.25 |
1.2 |
0.03 |
0.01 |
HY 926 Proprietà fisiche:
Densità |
8,1 g / cm3 |
Punto di fusione |
1320-1390 ℃ |
HY 926 proprietà meccaniche lega minima della temperatura ambiente:
stato lega |
Resistenza alla trazione |
Carico di snervamento |
Allungamento |
926 |
650 |
295 |
35 |
HY 926 Caratteristica:
1.It has high resistance to pitting and crevice corrosion when in Halide and H2S contained acid media.
2.In practice, effective in resistance of chloride stress corrosion cracking.
3.A variety of corrosion have good corrosion resistance capability in the normal oxidation and restore environment.
4.Upgrade mechanical properties than Cronifer 1925 LC-Alloy 904 L.
5. Alloys has Improved the stability of metallurgical compared to a range of 18% of the nickel content alloys.
6.With a certification of applied in manufacturing-related pressure vessel (VdTUV-196~400℃ and ASME )
struttura metallurgica
926 is face-centered cubic lattice structure.
Resistenza alla corrosione
926 is an austenitic stainless steel alloy has a similar chemical composition with 904L alloy, its nitrogen content is 0.2%, molybdenum content is 6.5%. Molybdenum and nitrogen content significantly increased the resistance of pitting and crevice corrosion in the halide media.Meantime, nickel and nitrogen not only ensures the stability of metallographical, but also reduce separating intergranular trend in the thermal process or welding process better than the nitrogen content of nickel alloy. 926 has particular corrosion resistance in the chloride ions medium due to the excellent local corrosion resistance and 25% nickel alloy content.A variety of experiments in the 10000-70000ppm of Chloride concentration, PH 5-6, 50-68℃ operating temperature of the slurry of limestone FGD system show that, after a 1-2 year trial period, 926 alloy without pitting and crevice corrosion.926 in other chemical media also has good corrosion resistance in the high temperature and high concentration of media, including sulfuric acid, phosphoric acid, acid gas, sea water, salt and organic acids.926 is the material that choosed for BAM directory Chapter 6 of “dangerous goods storage and transportation containers norms” by Berlin, Germany’s national Institute for Materials Research and Testing (BAM) . In addition, in order to have the best corrosion resistance only when the material is in the right state of metallurgy and guarantee clean conditions.
Application field:
Alloy 926 is a multipurpose material can be applied in many industrial:
1. Fire system, water purification system, marine engineering and hydraulic piping perfusion system
2. The pipeline, joint, air systems in the acidic gas production
3. Evaporator, the heat exchanger, filter, mixer, etc. in the phosphate production
4.Power plants condensation and pipe system in the use of sewage water to cool water
5. The use of acidic organic catalyst chlorinated derivatives production
6. The production of cellulose pulp bleacher
7. Polished bar in the orrosive oil wells
8. Hose system in the ocean engineering
9. Flue gas desulphurization system components
10. Sulfuric acid condensation and separation system
11. Crystalline salt concentration and the evaporator
12. Transport of corrosive chemicals containers
13. Reverse osmosis desalination plant
forma regolare per tutti i tipi di leghe | |||
Modulo | specificazione | fornitura Modulo | Altri |
Foglio | Spessore: 0.40-4.75mm, Generale Larghezza: 1000,1219,1500mm | Tutta la bobina o di parte di esso | Ricotto a freddo, superficiale 2B, 2E |
Piatto | Spessore: 4.76-60mm, Larghezza: 1500,2000,2500mm, Lunghezza: 3000,6000,8000,8500mm (piastra di base 10 millimetri può essere arrotolato) | Tutta la bobina o di parte di esso | laminazione a caldo singolo, stato solido soluzione ricotto, 1D Surface |
Cintura | Spessore: 0.10-3.0mm, Larghezza: 50-500mm | Tutta la bobina o formato specificato | Ricotto a freddo, superficiale 2B, 2E |
Bar & Rod | Laminati barΦ5-45mm, Length≤1500mm | Lucido Bar (cerchio, quadrato) | Soluzione ricottura, decalcificazione |
Forged barΦ26-245mm, Length≤4000mm | |||
tubo Weld | Outer diameterΦ4.76-135mm, Muro Thickness0.25-4.00mm, Lunghezza: ≤35000 mm | Base sul vostro requisito | |
tubi senza saldatura | Outer diameterΦ3-114mm, Muro Thickness0.2-4.5mm | Base sul vostro requisito | |
Filo | Outer diameterΦ0.1-13mm | Base sul vostro requisito | Ni Ni & lega, Ti e Ti lega |
forgiato | dischi, anelli, piazze, blocchi, lastre | Base sul vostro requisito | Acciaio, lega |
Flangs | Tutti i tipi di Flangs | Base sul vostro requisito | Acciaio, lega |
saldatura Materiale | filo della bobina Φ0.025mm-1,6 millimetri | Base sul vostro requisito | Certificato di Origine: America, Svezia, Gran Bretagna, Germania, Austria, Italia, Francia. |
Dritto WireΦ1.6mm-4,0 millimetri | |||
Saldatura rodΦ1.2mm-4,0 millimetri | |||
Tubo | Gomito, tre collegamenti, quattro collegamenti, formato differente diametro | Base sul vostro requisito | Ni Ni & lega, Ti e Ti lega |
Explosive laminato composito | Foglio Thickness≥2mm Raw | Base sul vostro requisito | Ni Ni & lega, Ti e Ti lega |