Cobalt Alloy Alloy L605 Haynes 25 UNS R30605
HY L605 재질 등급 및 등가물:Udimet 합금 L605, L605 합금, 코발트 합금 L605; 헤인즈 (25), UNS R30605
소개 :
HY L-605은 링 블레이드 및 연소실 부품 (시트 날조)과 같은 가스 터빈 분야에서 유용하며 또한 고온 소성로에서 머플 또는 라이너 같은 산업용 노 애플리케이션에 사용될 수있다
HY L605고용체는 2000 ° F (1093 ° C에서) 우수한 고온 강도와 우수한 내 산화성과 코발트 - 크롬 합금 tungstennickel 강화된다. 합금은 또한 좋은 착용 황화 저항에 저항하고 못살게 괴롭히는을 제공합니다.
HY L605 화학 성분 :
Alloy | % | Cr | Ni | Co | W | C | Fe | Mn | Si | P | S |
HY L605 |
MIN |
19.0 |
9.0 |
- |
14.0 |
0.05 |
- |
1.0 |
- |
- |
- |
MAX |
21.0 |
11.0 |
Balance |
16.0 |
0.15 |
3.0 |
2.0 |
0.4 |
0.04 |
0.03 |
HY L605 물리적 속성 :
Density | 9.27 g / cm3 |
Melting point | 1330 ℃ -1410 ℃ |
HY L605 시트 실내 온도에서 기계적 특성 :
합금 상태 | Tensile strength Rm N/mm² |
수율 strengthRP0.2 N / mm² 인 | Elongation A5 % |
솔루션 치료 | 980 | 460 | 50 |
HY L605 응용 프로그램 Fileds :
HY L-605은 링 블레이드 및 연소실 부품 (시트 날조)과 같은 가스 터빈 분야에서 유용하며 또한 고온 소성로에서 머플 또는 라이너 같은 산업용 노 애플리케이션에 사용될 수있다.
HY L605은 또한 항공기의 고온 부분에 사용되는 가스 터빈 엔진, 베어링, 스프링 및 심장 판막 부품.
Regular shape for all kinds of alloys | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |