Nickel Alloy Incoloy 901 UNS N09901
HY (901) 재질 등급과 동등
인코 로이 901 / 합금 901 / USN N09901 / W.Nr.2.466 NS / BS Nimonic901
HY 901 (UNS N09901 / 식당 1.4898)
HY 901 화학 성분 :
Alloy |
% |
Ni |
Cu |
Al |
Fe |
Ti |
Co |
Mn |
S |
C |
Si |
P |
Cr |
Mo |
B |
HY (901) |
Min. |
40.0 |
2.35 |
11.0 |
5.0 |
0.01 |
|||||||||
Max. |
45.0 |
0.50 |
0.35 |
Balance |
3.10 |
1.0 |
1.0 |
0.03 |
0.10 |
0.60 |
0.03 |
14.0 |
7.0 |
0.02 |
HY (901) 물리적 특성:
Density |
8.14 g / cm3 |
Melting point |
1,280에서 1,345 사이 ℃ |
HY (901) 실온에서 최소의 기계적 성질:
지위 |
Tensile strength |
Yield strength |
Elongation |
HY (901) |
1034 |
689 |
12 |
설명
고용체 강화 용 석출 강화 및 몰리브덴, 티타늄 및 알루미늄을 포함하는 니켈 - 철 - 크롬 합금. 합금은 높은 항복 강도 및 약 1110 ° F (600 °의 C)에 온도 크립 저항성. subtantial 철 함량은 양호한 단조 특성과 고강도를 결합하는 합금을 가능하게한다. 디스크 및 샤프트 가스 터빈에 사용된다. 표준 제품의 형태는 원형이다.
부식 저항
알루미늄 (901)은 일반적으로 제트 엔진 동작 검색된 기압 우수한 내식성을 갖는다. 이 유형 309 및 310 스테인리스 스틸 등의 합금보다 약간 낮은 확장 성을 가지고있다.
작업 성
뜨거운 작업
합금 (901) 2050 ° F (1121 °의 C) 1850 ° F (1010 °의 C), 금속 온도 사이에 위조된다. 빛 화기 작업은하지 이하 1600 ° F (871 °에 C)하지만까지 계속 될 수있다. 금속 온도는 빠른 작업하는 동안 2050 ° F (1121 °의 C)를 초과하지 않아야합니다. 빌렛은 뜨거운 용광로에 넣고 침전 경화 범위를 통해 신속하게 가열해야한다.
용접성
알루미늄 (901)은 불활성 가스 아크 용접 방법에 의해 할 수있다. 이는 용접 어렵다. 모든 용접 솔루션 처리 조건에서 수행되어야한다. 냉간 가공 된 부품을 다시 솔루션은 용접하기 전에 처리해야합니다. 재 솔루션 처리는 안정화 및 노화되기 전에 용접 후 좋습니다.
Specifications:
bar |
AMS 5661/AMS 5660 |
forging/ring |
AMS 5661 |
wire |
AMS 5830 |
Regular shape for all kinds of alloys | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |