니켈 합금 인코넬 686 UNS N06686
HY 686 재질 등급과 동등
인코넬 686 / UNS N06686 / Werkstoff Nr.2.4606
HY 686 화학 성분 :
Type |
% Main Chemical Composition % |
||||||||||
Mo |
Cr |
Fe |
W |
C |
Si |
Mn |
P |
S |
Ti |
Ni |
|
HY 686 |
15.0~17.0 |
19.0 ~ 23.0 |
≤5.0 |
3.0 ~ 4.4 |
≤0.01 |
≤0.08 |
≤0.75 |
≤0.04 |
≤0.02 |
0.02-0.25 |
Rest |
HY 686 물리적 특성:
Density | Melting range | Hardness |
8.73 | 1338~1380 | HRC36 |
HY 686 합금 실내 온도에서 최소한의 기계적 특성
조건 |
Tensile Strength |
Yield strength |
Elongation |
RM은 N / mm² 인 |
RP 0 2 N / mm² 인 |
5 % |
|
Solution |
690 |
380 |
45 |
Cold Drawing/Hot Rolled |
1115 |
1020 |
23.1 |
아래와 같이 HY 686 특징
HY 686 가혹한 부식 환경에서의 내식성을 가지고 NI-크롬 Mo의 고용 강화 및 내식성 니켈 계 합금이다. 이들은 주로 화학적 처리, 처리, 오염 방지, 제지 산업 쓰레기 처리 등의 영역에서 기, 반응 용기 및 전달 관을 가열 적용
Specifications:
Rod and Bar |
ASTM B-574;ASME SB-574;VdTÜV 515,12.98;DIN 17752 |
Wire |
ASTM B-574;ASME SB-574; DIN 17753 |
Plate, Sheet & Strip |
ASTM B-575;ASME SB-575;VdTÜV 515,12.98;DIN 17750 |
Forging |
ASTM B-564;ASME SB-564;DIN 17754 |
Seamless Tube & Pipe |
ASTM B-622/B 829*;ASME SB-622/SB-829*;VdTÜV 515,1298;DIN 17751 |
Welded Tube/pipe |
ASTM B-626/B-751*; ASME SB-626/ SB-751*;ASTM B-619/B-775*; ASME SB-619/SB-775* |
Regular shape for all kinds of alloys | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |