Nickel Alloy Inconel 725 UNS N07725
HY 725 재질 등급과 동등
상표 인코넬 725 / UNS N07725
HY 725 화학 성분
Alloy |
% |
Ni |
Cr |
Mo |
Al |
Ti |
Fe |
Nb |
HY 725 |
Min. |
55 |
19 |
7 |
1 |
balance |
2.75 |
|
Max. |
59 |
22.5 |
9.5 |
0.35 |
1.7 |
4 |
아래와 같이 HY 특성 725 :
내식성이 뛰어난 및 니켈 - 크롬 - 몰리브덴 - 니오브 합금은 매우 높은 강도 연령 경화성이다. 이 합금의 강도가 높은 연성과 인성을 달성하기 위하여 열처리에 의해 개발되고있다. 합금은 수소 취성 및 응력 부식 균열에 대한 내성이다.
HY 725 응용 분야 :
신 가스 서비스 옷걸이, 방문 젖꼭지, 사이드 포켓 맨드릴과 광택 구멍 콘센트에 사용됩니다. 또한 해양 응용 프로그램에서 고강도 고정에 사용됩니다.
Specifications:
Bar and wire: |
ASTM B 805 /ASME Code Case 2217 |
Regular shape for all kinds of alloys | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |