Nickel Alloy Hastelloy C-4 UNS N06455

\

Short Introduction:

HY HC-4 / 하 스텔로이 C-4 / UNS N06455 / AFNOR NC16D16M 이다 뛰어난 갖는 니켈 - 크롬 - 몰리브덴 합금

심지어 1200 1900 ° F 내지 (649-1038의 ° C)의 범위에서 시효 후 높은 연성 및 내식성에 의해 입증되는 바와 같이, 고온 안정성. 이 합금은 이와 같은 용접 조건의 가장 화학 공정 응용에 적합하게, 상기 용접 열 영향 부에서 입계 석출물의 형성에 저항. C-4 합금은 또한 균열 응력 부식에 1900 ° F (1038 °의 C)까지의 분위기를 산화에 우수한 저항이있다.



  • Fob price: US $ 25 - 80 / Kilogram
  • Min.order quantity: 300kg
  • Port: Shanghai
  • Payment terms: L/C,T/T,30% down payment after order, balance against copy of B/L
  • Product Detail

    Product Tags

    HY HC-4 화학를 compostion :

    Alloy

    %

    Ni

    Cr

    Mo

    Fe

    C

    Mn

    Si

    Co

    S

    P

    Ti

    C-4

    Min.

    65

    14

    14

    Max.

    18

    17

    3

    0.01

    1

    0.08

    2

    0.01

    0.025

    0.7

    HY HC-4 물리적 특성 :

    Density

    8.64 g / cm3

    Melting point

    1,350에서 1,400 사이 ℃

    HC HY-4 실온에서 최소 합금 기계적 성질 :

    Alloy

    Tensile strength
    Rm N/mm2

    Yield strength
    RP0.2N/mm2

    Elongation
    A5 %

    C-4

    783

    365

    55

    HC HY-4 합금은 뛰어난 갖는 니켈 - 크롬 - 몰리브덴 합금
    심지어 1200 1900 ° F 내지 (649-1038의 ° C)의 범위에서 시효 후 높은 연성 및 내식성에 의해 입증되는 바와 같이, 고온 안정성. 이 합금은 이와 같은 용접 조건의 가장 화학 공정 응용에 적합하게, 상기 용접 열 영향 부에서 입계 석출물의 형성에 저항. C-4 합금은 또한 균열 응력 부식에 1900 ° F (1038 °의 C)까지의 분위기를 산화에 우수한 저항이있다.

    HY HC-4alloy has exceptional resistance to wide variety of chemical process environments. These include hot contaminated mineral acids, solvents, chlorine and chlorine contaminated media (organic and inorganic), dry chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.

    HY HC-4alloy는 핫 화가, 단조, 압출에 영향을 미칠 수 있습니다. 비록
    합금 작동 - 경화하는 경향이 성공적으로 딥 드로잉 할 수있다, 회전 눌러 형성 또는 천공. 옥시 아세틸렌 및 서브 머지 드 아크 공정 권장되지 않더라도 제조 된 아이템이 부식 서비스에 사용하고자하는 경우, 용접의 일반적인 방법 모두, HASTELLOY C-4 합금을 용접하는데 사용될 수있다. 특별한주의가 과도한 열 입력을 피하기 위해주의해야한다.

    Specifications:

    Sheet, Plate & Strip

    SB 575/B 575(P= 43)

    Billet, Rod & Bar

    SB 574/B 574(P= 43)

    Bare Welding Rods & Wire

    SFA 5.14/ A 5.14(ERNiCrMo-7)DIN 2.4611(SG-NiMo16Cr16Ti)(F= 43)

    Seamless Pipe & Tube

    SB 622/B 622(P= 43)

    Welded Pipe & Tube

    SB 619/B 619;SB 626/B 626(P= 43)

    Fittings

    SB 366/B 366(P= 43)

     

    Regular shape for all kinds of alloys
    Form Specification Supply Form Others
    Sheet Thickness:0.40-4.75mm,General Width:1000、1219、1500mm Whole Coil or piece of it Cold Annealed,Surface 2B、2E
    Plate Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) Whole Coil or piece of it Single hot rolling,Solid solution annealed state,Surface 1D
    Belt Thickness:0.10-3.0mm,Width:50-500mm Whole Coil or Specified size Cold Annealed,Surface 2B、2E
    Bar & Rod Rolled barΦ5-45mm,Length≤1500mm Polished Bar(circle、Square) Solution annealing,descaling
    Forged barΦ26-245mm,Length≤4000mm
    Weld tube Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm Base on your requirement
    Seamless Tube Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm Base on your requirement
    Wire Outer diameterΦ0.1-13mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy
    Forged piece discs,rings,squares,blocks,slabs Base on your requirement Steel, Alloy
    Flangs All kinds of Flangs Base on your requirement Steel, Alloy
    Welding Material Coil wire Φ0.025mm-1.6mm Base on your requirement Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France.
    Straight WireΦ1.6mm-4.0mm
    Welding rodΦ1.2mm-4.0mm
    Tube Elbow, three links, four links, different diameter size Base on your requirement Ni & Ni alloy, Ti & Ti alloy
    Explosive bonded laminate Raw Sheet Thickness≥2mm Base on your requirement Ni & Ni alloy, Ti & Ti alloy





  • Previous:
  • Next:

  • RELATED PRODUCTS

    WhatsApp Online Chat !